In this case, there are more heating systems involved andmore rooms or annexes, each with different temperature requirements.
Ensuring both a comfortable temperature and a decent energybill in a commercial building can be quite the challenge, but there are a fewthings you can do to get the best out of both worlds.
Activities carried out in commercial buildings requiredifferent degrees of thermal comfort. For instance, a room full of computerscan have a set temperature of nineteen degrees, since the heatdifference is generated by the computers themselves.
Identify the requirements for every room and make sure thatthere are enough thermostats to control the heat efficiently.
A thermostat reading the wrong room temperature can increasethe monthly energy costs or contribute to a thermal discomfort.
To check a thermostat, place a glass thermometer near it andread both of them after at least fifteen minutes. If the temperatures match,then the thermostat is working properly. If the difference is over one degree,you need to recalibrate it. This can be done by detaching the cover andcleaning it on the inside with a soft brush and cotton swabs. If there are anysigns of corrosion or the mercury vial needs to be levelled, call aprofessional to help you out.
Preventing heating issues is easier, less costly and morecomfortable than repairing the damage. Just like in a domestic property, allthe boilers, radiators and the pipework need regular maintenance to ensureeverything functions as it should. Failing to run the regular check-ups willresult in losing heat or appliance malfunction.
Losing heat through the hot water pipes is a common mistakein commercial buildings. While water is transported through the pipes, theyreceive a consistent amount of heat. When the water enters the radiator in theroom, it is not as hot as it was when it entered the system, increasing theroom temperature only a fraction of what it was supposed to. To make sure lessheat gets lost, you can insulate the hot water pipes.
Exhaust systems are one of the most important parts of theheating system. If the vents are partially or completely blocked withdebris, the carbon monoxide can't be expelled properly and will travel backinto the system and dissipate inside the building. As carbon monoxide ispoisonous and impossible to detect for humans, you can install CO detectors andclean the vents before winter comes in full swing.
Article kindly provided by enhancedenergysolutions.co.uk